Measuring 40" square making it perfect for covering even the biggest of side trays.

One of the biggest hates of most Match anglers is to fish under a brolly, with the additional size provided, this brolly is ideal for keeping the worst of the weather off you whilst not hampering your fishing at all.

The brolly also features the two tilt system as found on the full size Pole shipper and System Brollies.

THIS WILL FIT ALMOST ANY LEG SYSTEM ROUND OR SQUARE.

RRP £35.00....................SAVING £4.00

2 x Spare Black/Green Female Handwheels to fit the MX Boxes

MAVER MALE HANDWHEEL (Black/Green) (Pack 2)

2 x Spare Black/Green Handwheels to fit the MXi Boxes

30mm Telescopic Leg for the Maver MV-R Z-Frame, UFO Seatbox & S4 Seatbox

500mm Long

Sold in Singles

ABS Stacking Lid to fit the Maver MV-R Z-Frame, UFO Seatbox & S4 Seatbox

20mm Stacking Module & Lid to fit the Maver MV-R Z-Frame, UFO Seatbox & S4 Seatbox

80mm Stacking Module & Lid to fit the Maver MV-R Z-Frame, UFO Seatbox & S4 Seatbox

Barrow Arms for the Maver MV-R Z-Frame, UFO Seatbox & S4 Seatbox

SOLD IN PAIRS

Replacement hinges for the Maver MV-R Z Frame, UFO Seatbox & S4 Seat Boxes

2 Per Pack

Footplate for the Maver MXi Series 1, Series 2 & 101 Seatbox.

RRP £70.00....................SAVING £7.00

Replacement Footplate that fits the MXi Series 3 & 4 Seatboxes

RRP £110.00....................................SAVING £15.00

MAVER MXi WINDERS

The MXi slider winders from Maver are available in three sizes - 13cm, 19cm and 26cm.

All come with a slider along the width of the winder eliminating the need for pole anchors.

13cm WINDERS - PACK OF 20

19cm WINDERS - PACK OF 12

26cm WINDERS - PACK OF 10

A Set of 2 replacement hinges to fit either the Pro Seatbox, Club Seatbox, MX Seatbox and Reality Seatbox

A Replacement Pole Seat that will fit either the Pro Or Club Seatbox.

A perfect addition to the Maver Reality Seatbox.

This best selling Seatbox for 2 years did not have the option of a Footplate but that has all changed.

The Footplate is now available and is supplied with 2 x 30mm legs and is stored neatley underneath the box

This new stable, lightweight side tray from Maver will easily accomodate a number of bait tubs and accessories.

The corners have drainage holde to stop the tray filling with water in rainy conditions.

Supplied with universal fittings for 25, 30 & 36mm round legs

RRP £33.00....................SAVING £4.00

Signature 30mm Telescopic Legs

A pair of black anodised telescopic legs for the Signature range of seat boxes.

2 LEGS PER PACK

RRP £35.00....................SAVING £5.00

Signature 30mm Telescopic Legs (700mm)

A pair of 700mm long black anodised telescopic legs for the Signature range of seat boxes.

Extends to 1,080mm.

2 LEGS PER PACK

RRP £40.00....................SAVING £5.00

The new 25, 30 and 36mm leg attachment means it can be fixed at various angles.

Designed to take up to six pole top kits.

Maver’s new mini accessory bar fits on a single seat box leg and comes complete with changeable fittings to accommodate 25mm, 30mm, and 36mm legs.

Two accessory blocks are included to attach keepnets or any attachments you wish to use.

MAVER SIGNATURE BAIT BOWL ATTACHMENT.

A new bait bowl attachment.

The universal fitting allows it to be attached to either square or round legs.

Measuring 26cm the bowl is ideal for method mix or larger quantities of pellet, yet compact so it is not obtrusive.

A useful attachment.

Ideal for use with bait waiters and wind socks.

Featuring the universal attachment associated with the Signature range allowing fitment with 25mm, 30mm, and 36mm legs.

Signature D36 Telescopic legs

Available in 50cm & 80cm Lengths

2 PER PACK

MAVER SIGNATURE D36/MXi 100mm TRAY UNIT

MXi 100mm tray unit.

RRP £57.00....................SAVING £7.00

MAVER SIGNATURE D36/MXi 30mm TRAY & 19/13cm WINDER UNIT

MXi 30mm tray supplied with both 13cm and 19cm winder sets.

RRP £55.00………………..SAVING £7.00

MAVER SIGNATURE D36/MXi 30mm TRAY & 26cm WINDER UNIT

MXi 30mm tray supplied with 26cm winder set.

RRP £55.00………………..SAVING £7.00

MAVER SIGNATURE D36/MXi 30mm TRAY UNIT

SIGNATURE/MXi 30mm tray unit.

RRP £45.00....................SAVING £5.00

High quality double-brace umbrella arm.

Featuring a clever leg fitting allowing it to be used on the majority of leg systems with either 25mm, 30mm or 36mm legs.

Extendable rod rest that fits all seatboxes with 30mm legs.

With many commercial catches now requiring three keepnets, this attachment is supplied with three short keepnet arms.

Also ideal for use with various other attachments.

Very competitively priced and a must for serious commercial anglers.

The clever leg fitting allows the arm to be used on the vast majority of seat boxes with 25mm, 30mm or 36mm legs.

Multi-adjustable rod rest arm that will fit all makes of seatbox with a 30mm leg.

A new and innovative idea from Maver, this outrigger support and legs will fit all 25mm, 30mm and 36mm leg systems.

RRP £30.00....................SAVING £4.00

The Signature Pro extending mega side tray will fit almost all seat boxes on the market.

Features two outriggers, with the 150mm uprights having a double use. 

One end is threaded and suitable for roosts, tulips etc, whilst the the other has a locking screw that will support a bait umbrella.

Will easily accomodate a large quantity of bait and accessories.

Suitable for 30 & 36mm legs.

Dimensions – 83cm x 50cm.

Packs down to 55cm x 50cm.

RRP £140.00............................................SAVING £17.00

The Signature Pro extending slim side tray will fit almost all seat boxes on the market.

Features two outriggers, with the 150mm uprights having a double use.

One end is threaded and suitable for roosts, tulips etc, whilst the the other has a locking screw that will support a bait umbrella.

Will easily accomodate a large quantity of bait and accessories.

Suitable for 30 & 36mm legs.

Dimensions – 83cm x 35cm.
Packs down to 55cm x 35cm.

RRP £120.00............................................SAVING £15.00

An extremely versatile quick release double accessory arm from the Signature QR seatbox attachment range.

A double accessory arm offering fantastic flexibility.

Suitable for a wide range of applications and great for doubling up on attachments such as rests, pole socks, etc.

Featuring a quality brass thread and covered in a soft foam to prevent accidental damage to rod / pole sections.

Available in 25cm and 35cm lengths and supplied with inserts to fit 25mm, 30mm and 36mm round legs.

An extremely versatile quick release single accessory arm from the Signature QR seatbox attachment range.

A single accessory arm offering fantastic flexibility.

Suitable for a wide range of applications.

Featuring a quality brass thread and covered in a soft foam to prevent accidental damage to rod / pole sections.

Available in 20cm, 30cm and 50cm lengths and supplied with inserts to fit 25mm, 30mm and 36mm round legs.

An extremely useful quick release keepnet arm from the Signature QR seatbox attachment range.

A high quality quick release keepnet arm offering fantastic flexibility.

Nowadays, an essential item for any serious match angler.

Featuring a quality brass thread and snap lock fitting.

Supplied with inserts to fit 25mm, 30mm and 36mm round legs.

An extremely versatile quick release mini rear rest from the Signature QR seatbox attachment range.

A high quality and extremely versatile mini rear rod rest offering fantastic flexibility.

Suitable for a wide range of applications, but particularly well suited to feeder or ledger work.

Featuring a quality brass thread and covered in a soft foam to prevent accidental damage to rod sections.

Supplied with inserts to fit 25mm, 30mm and 36mm round legs.

An extremely versatile quick release rear rest from the Signature QR seatbox attachment range.

A high quality and extremely versatile rear rod rest offering fantastic flexibility.

Suitable for a wide range of applications, but particularly well suited to feeder or ledger work.

Featuring a quality brass thread and covered in a soft foam to prevent accidental damage to rod sections.

Supplied with inserts to fit 25mm, 30mm and 36mm round legs.

A simple but brilliantly effective roost.

Ultra lightweight six dip capacity keeps those precious top kits out of harms way.

Suitable for 25mm, 30mm and 36mm legs.

A high quality rod rest offering fantastic flexibility.

Suitable for a wide range of feeder / ledger fishing applications – perfect when coupled with QR single accessory arms.

Featuring a quality brass thread and covered in a soft foam to prevent accidental damage to rod sections.

Available in 30cm and 50cm lengths.

High quality umbrella arm.

Measuring 29cm and featuring the clever leg fitting allowing it to be used on the majority of leg systems with either square or round legs.

MAVER SIGNATURE BARROW ARMS x 2

Signature Barrow Arms (pair)

To Fit 25mm & 30mm Dia Round Legs

These also fit the MXi Seatboxes

RRP £45.00....................SAVING £5.00

MAVER MXi DOUBLE CROSS DRAWER

MXi double cross drawer unit.

Incorporating 20mm tray.

RRP £90.00......................SAVING £11.00

MAVER MXi DOUBLE FRONT DRAWER UNIT

MXi double front drawer unit.

Incorporating 20mm tray.

RRP £90.00....................SAVING £11.00

The New Signature Pro Pole Support is lightweight, fully height adjustable and extrtemely stable.

It is profiled on one side and smooth on the other.

The profiled side is perfect when fishing at long lengths to keep it still and the smooth side is ideal when fishing on moving waters.

This will fit 30mm and 36mm legs so can be used on other seatboxes

RRP £80.00......................................SAVING £10.00

MAVER SIGNATURE/MXi SINGLE CROSS DRAWER

MXi single cross drawer unit.

Incorporating 20mm tray.

RRP £65.00....................SAVING £8.00

MAVER MXi/SIGNATURE SPARE HINGES (1 x Pair)
 

A Pair of replacement Hinges for the MXi & SIGNATURE Range of Boxes.

MAVER SIGNATURE/MXi SPARE PLASTIC FRONT DRAWER
 

Spare plastic front drawer for the MXi Range of Boxes.

MAVER SIGNATURE/MXi SPARE PLASTIC SIDE DRAWER

Spare plastic Side drawer for the MXi Range of Boxes.

MAVER SIGNATURE/MXi SPIRIT LEVEL
 

Top quality and easy to fit MXi seatbox spirit level.
 

Simply drill the desired location on your seatbox using a 3mm drill bit, fix the rivets (supplied) in place and you're ready to go!

MAVER SIGNATURE/MXI STACKING MODULE WITH MOULDED RUNNER

Signature/MXi stacking module with moulded runners and 20mm tray.

RRP £35.00....................SAVING £4.00

MAVER SIGNATURE/MXi STANDARD LEGS (1 x PAIR)

A pair of black anodised standard legs for the SIGNATUR/MXi series range of seatboxes.

25mm Diameter

A 30mm Add on Tray that will fit the Signature & MXi range of seatboxes

RRP £40.00....................................SAVING £5.00

MAVER WHEEL KIT

MXi/Signature/MV-R wheel kit (pair).

Please note the MXi/Signature wheel kit will fit MXi Series 3, 4 & 5 seatboxes only

RRP £70.00....................SAVING £5.00

The new Trans-porta barrow from Maver incorporates many features making it the best four-wheeled tackle trolley on the market.

Featuring a super strong, fully welded steel frame and a wide track four-wheel design, you can be sure the Trans-porta barrow is more than up to the job of transporting tackle to and from your peg.

Double braced carry handles off additional strength and durability, whilst the massive 25kg carry capacity zip-up carry bag will accommodate everything but the kitchen sink!

The frame can be extended at the front of the trolley to allow for nets bags, etc, to be transported in an upright position.

The T-bar design also allows rod bags, etc, to be strapped down securely.

Finally, the Trans-porta barrow also features a fully removable seat box load platform allowing for transportation of most makes of seat box currently on the market.

RRP £200.00....................SAVING £22.00