MATCH/POWER TOP KITS FOR THE DAIWA AIR POLE

MATCH TOP 3 - RRP £130.00...................................................SAVING £16.00

MATCH TOP 4 - RRP £309.00...................................................SAVING £27.00

INTERLASTIC POWER TOP 2 KIT - RRP £119.00..............SAVING £13.00

MATCH/POWER TOP KITS FOR THE AIR Z POLES

MATCH TOP 3 - RRP £145.00...................................SAVING £22.00

MATCH TOP 4 - RRP £306.00...................................SAVING £31.00

PULLER POWER TOP 2 KIT - RRP £120.00...............SAVING £18.00

MATCH TOP 3s & 4s FOR THE AIRITY SUPER SLIM POLES

MATCH TOP 3 - RRP £130.00..............................................SAVING £16.00

MATCH TOP 4 - RRP £309.00..............................................SAVING £27.00

INTERLASTIC POWER TOP 2 - RRP £119.00.....................SAVING £13.00

MATCH/POWER TOP KITS FOR THE DAIWA AIRITY X POLES.

MATCH TOP 3 KIT - RRP £135.00.............................................SAVING £20.00

MATCH TOP 4 KIT - RRP £294.00.............................................SAVING £29.00

INTERLASTIC POWER TOP 2 KIT - RRP £120.00......................SAVING £18.00

A high Diameter section that is the equivalent length of a telescopic match top 2.

Usually when you wish to use a high diameter elastic there is a need to cut back the top two.

With the high diameter of the BBPK1 there is no need to sacrifice on the length of your pole.

The BBPK1 fits onto the match third and does not affect the original elastic rating of your pole.

The Power kit fits the AIR Z, AIR, AIR XLS, AIRITY SLIM, DAP, TAP, TNPX, CNGP, TTP, SPP, SCP, EA, WAT, WKP, CPP, CNP, TDRP, WHP, CRP and MWP Poles.

Big Bore Power Kit + No 3 Section complete that fits the

AIR Z, AIR, AIR XLS, AIRITY SLIM, DAP, TAP, TNPX, CNGP, TTP, SPP, SCP, EA, WAT, WKP, CPP, CNP, TDRP, WHP, CRP and MWP Poles.

RRP £88.00..............................SAVING £8.00

SPARE TOP KITS FOR THE CONNOISSEUR G50 POLE

MATCH TOP 3 KIT - RRP £95.00.....................................SAVING £14.00

MATCH TOP 4 KIT - RRP £211.00...................................SAVING £21.00

INTERLASTIC POWER TOP 2 KIT - RRP £100.00................SAVING £15.00

MATCH/POWER TOP KITS FOR THE DAIWA CONNOISSEUR G50 XLS POLES.

MATCH TOP 3 KIT - RRP £95.00........................................SAVING £14.00

MATCH TOP 4 KIT - RRP £211.00........................................SAVING £21.00

INTERLASTIC POWER TOP 2 KIT - RRP £100.00.................SAVING £15.00

SPARE TOP KITS FOR THE DAWA CONNOISSEUR SYSTYEM WHIP 8m

HOLLOW TOP 3 KIT - RRP £33.00.....................................SAVING £3.00

SPLICED TOP 3 KIT - RRP £53.00.....................................SAVING £5.00

SPARE TOP KITS FOR THE CONNOISSEUR XLS G90 POLE

MATCH TOP 3 KIT - RRP £95.00.....................................SAVING £14.00

MATCH TOP 4 KIT - RRP £232.00...................................SAVING £23.00

INTERLASTIC POWER TOP 2 KIT - RRP £120.00................SAVING £18.00

DAIWA CUPPING KIT

This Cupping Kit is designed for the majority of Daiwa UK made poles.

The CUPK1 will fit the

AIR Z, AIR, AIR XLS, AIRITY SLIM, DAP, TAP, TNPX, CNGP, TTP, SPP, SCP, EA, WAT, WKP, CPP, CNP, TDRP, WHP, CRP and MWP Poles.

THE CUPPING KIT DOES NOT COME WITH CUPS INCLUDED AS IN THE PICTURE

DAIWA GENERIC CARP POWER TOP 2 KIT (CTK10)

The CTK10 will fit the

AIR Z, AIR, AIR XLS, AIRITY SLIM, DAP, TAP, TNPX, CNGP, TTP, SPP, SCP, EA, WAT, WKP, CPP, CNP, TDRP, WHP, CRP and MWP Poles.

Designed to convert Daiwa's past and present pole line up into carp power tools.

There are Seven designs and all made from top grade high modulus carbons.

Featuring a high bore tip section, all the CTK's allow use of elastic up to No16.

Each model is approximately 3.0m long.

RRP £79.00...............SAVING £14.00

DAIWA GENERIC CARP POWER TOP 2 KIT (CTK5)

The CTK5 will fit the

AIR Z, AIR, AIR XLS, AIRITY SLIM, DAP, TAP, TNPX, CNGP, TTP, SPP, SCP, EA, WAT, WKP, CPP, CNP, TDRP, WHP, CRP and MWP Poles.

RRP £105.00...............SAVING £13.00

THIS IS THE SAME AS THE CTK10 BUT A MUCH BETTER QUALITY CARBON

The benefit of a power kit where you can pull the elastic to increase the tension on a running fish is now a must have feature.

Designed with a reinforced wall the handling position is ideal

These come with a Cloud finish and Pre cut with either a 4.0mm or 4.7mm PTFE bush

This will fit the AIR Z, DAP, DAP XLS,  AIR, AIR XLS, AIRITY SLIM, TAP, TNPX, CNGP, TTP, SPP, SCP, EA, WAT, WKP, CPP, CNP, TDRP, WHP, CRP and MWP Poles.

RRP £105.00.....................................SAVING £16.00

The benefit of a power kit where you can pull the elastic to increase the tension on a running fish is now a must have feature.

Designed with a reinforced wall the handling position is ideal

These come with a Carbon finish and Pre cut with either a 4.0mm or 4.7mm PTFE bush

This will fit the AIR Z, DAP, DAP XLS,  AIR, AIR XLS, AIRITY SLIM, TAP, TNPX, CNGP, TTP, SPP, SCP, EA, WAT, WKP, CPP, CNP, TDRP, WHP, CRP and MWP Poles.

RRP £95.00.....................................SAVING £14.00

The benefit of a power kit where you can pull the elastic to increase the tension on a running fish is now a must have feature.

Designed with a reinforced wall the handling position is ideal

These come with a Cloud finish, No3 fitted with PTFE nose cone and Pre cut with either a 4.7mm or 5.8mm PTFE bush

This will fit the AIR Z, DAP, DAP XLS,  AIR, AIR XLS, AIRITY SLIM, TAP, TNPX, CNGP, TTP, SPP, SCP, EA, WAT, WKP, CPP, CNP, TDRP, WHP, CRP and MWP Poles.

RRP £130.00.....................................SAVING £20.00

The benefit of a power kit where you can pull the elastic to increase the tension on a running fish is now a must have feature.

Designed with a reinforced wall the handling position is ideal

These come with a Carbon finish, No3 fitted with PTFE nose cone and Pre cut with either a 4.7mm or 5.8mm PTFE bush

This will fit the AIR Z, DAP, DAP XLS,  AIR, AIR XLS, AIRITY SLIM, TAP, TNPX, CNGP, TTP, SPP, SCP, EA, WAT, WKP, CPP, CNP, TDRP, WHP, CRP and MWP Poles.

RRP £120.00.....................................SAVING £18.00

DAIWA GENERIC No 3 POWER SECTION (DGPS3-AU)

The DGPS3-AU is a Power No 3 section that will fit the

AIR Z, AIR, AIR XLS, AIRITY SLIM, DAP, TAP, TNPX, CNGP, TTP, SPP, SCP, EA, WAT, WKP, CPP, CNP, TDRP, WHP, CRP and MWP Poles.
 

RRP £53.00...............SAVING £8.00

DAIWA GENERIC No 4 SECTION (DGPS4-AU)

The DGPS4 is a Generic No 4 section that will fit the

AIR Z, AIR, AIR XLS, AIRITY SLIM, DAP, TAP, TNPX, CNGP, TTP, SPP, SCP, EA, WAT, WKP, CPP, CNP, TDRP, WHP, CRP and MWP Poles.

RRP £100.00...............SAVING £15.00

DAIWA GENERIC SECTIONS

These New Generic Sections have been produced to fit the following Old Daiwa Poles.

CRP161, SPP160, WHP160, MWP811, CNP510, EA160, TNP410, TNXP145A.

 

No5 - RRP £158.00....................SAVING £9.00

No6 - RRP £179.00....................SAVING £11.00

No7 - RRP £210.00....................SAVING £19.00

THESE NEW GENERIC SECTIONS HAVE BEEN MADE TO FIT ALL OF THE CURRENT UK MADE DAIWA POLES

(EXCEPT THE No5 & 6 OF THE WHISKER POLES)

No5 - RRP £125.00....................SAVING £19.00

No6 - RRP £160.00....................SAVING £24.00

No7 - RRP £185.00....................SAVING £28.00

The T2MKC is a generic Match top 2 kit that will fit the TNXP, CNZP and CNXP Poles.
 

RRP £35.00...............SAVING £10.00

The T3MK is a Generic Match Top 3 Kit that will fit the

AIR Z, AIR, AIR XLS, AIRITY SLIM, DAP, TAP, TNPX, CNGP, TTP, SPP, SCP, EA, WAT, WKP, CPP, CNP, TDRP, WHP, CRP and MWP Poles.
 

RRP £90.00...............SAVING £11.00

The benefit of a power kit where you can pull the elastic to increase the tension on a running fish is now a must have features.

The twin holes allow one important option; you can locate a winder bung allowing you to store more of your valuable Hydrolastic in place.

Designed with a reinforced wall the handling position is ideal, leaving room for the bung to sit inside, just below the last hole.

This will fit the AIR Z, AIR, AIR XLS, AIRITY SLIM, DAP, TAP, TNPX, CNGP, TTP, SPP, SCP, EA, WAT, WKP, CPP, CNP, TDRP, WHP, CRP and MWP Poles.

RRP £100.00....................SAVING £15.00

The New Interlastic Match Top 3 Kit.

This will fit the AIR, DAP, TNPX, CNGP, TAP, TTP, SPP, SCP, EA, WAT, WKP, CPP, CNP, TDRP, WHP, CRP and MWP Poles

RRP £100.00....................SAVING £15.00

The No3 Section only, that will fit all Match Top 2 Kits and Big Bore Kits off the following Poles.

 AIR, DAP, TNPX, CNGP, TAP, TTP, SPP, SCP, EA, WAT, WKP, CPP, CNP, TDRP, WHP, CRP and MWP Poles

 

RRP £60.00....................SAVING £9.00

The benefit of a power kit where you can pull the elastic to increase the tension on a running fish is now a must have features.

The twin holes allow one important option; you can locate a winder bung allowing you to store more of your valuable Hydrolastic in place.

Designed with a reinforced wall the handling position is ideal, leaving room for the bung to sit inside, just below the last hole.

This will fit the AIRP, DAP, TNPX, CNGP, TAP, TTP, TNXP, SCP, WAT & CPP Poles

RRP £100.00....................SAVING £15.00

The benefit of a power kit where you can pull the elastic to increase the tension on a running fish is now a must have features.

The twin holes allow one important option; you can locate a winder bung allowing you to store more of your valuable Hydrolastic in place.

Designed with a reinforced wall the handling position is ideal, leaving room for the bung to sit inside, just below the last hole.

This will fit the AIR Z, AIR, AIR XLS, AIRITY SLIM, DAP, TAP, TNPX, CNGP, TTP, SPP, SCP, EA, WAT, WKP, CPP, CNP, TDRP, WHP, CRP and MWP Poles.

RRP £100.00....................SAVING £15.00

POWER TOP 2 KIT TO FIT THE DAIWA MULTI MARGIN POLE (DIS2PK)

RRP £100.00.....................................SAVING £15.00

There are two different types; the PHEX 2 can be used on the 13mt and 14.5mt sections of numerous models

PHEX 2 fits the TNSP, TDXP, CNXP, MWSP and MWXP Poles.

The new PHEX 5 will fit all current Daiwa Poles

PHEX 2 - RRP £79.00....................SAVING £30.00  

(Reduced to clear - Only 1 left)

PHEX 5 - RRP £95.00....................SAVING £14.00

SPARE POWER TOP 2 KIT FOR THE DAIWA CARP 10m POLE

SPARE POWER TOP 2 KIT FOR THE DAIWA POWER CARP MARGIN 5.5m POLE

SPARE POWER TOP 2 KIT FOR THE DAIWA POWER CARP MARGIN  8m POLE

Designed to fit the 5-6 or 7-8 sections.

To give extra confidence when striking into big fish or when using the p[ole at mid-way lengths

POWER MINI PHEX 5/6 - RRP £90.00...............SAVING £13.00

POWER MINI PHEX 7/8 - RRP £95.00...............SAVING £14.00

The Pre Bore Kits feature the reinforced area of wrapped carbon for compression resistance and to allow for drilling and fitting of any preferred pulling kit bush.

Now comes with a Nose Cone already fitted.

AVAILABLE IN STANDARD FINISH OR CLOUD FINISH WITH 4.7mm/5.8mm BUSH

These will fit the AIR Z, AIRP, AIRITY SLIM, DAP, TNPX, CNGP, TAP, TTP, SPP, SCP, EA, WAT, WKP, CPP, CNP, TDRP, WHP, CRP and MWP Poles.

STANDARD FINISH 4.7mm/5.8mm - RRP £95.00............SAVING £14.00

CLOUD FINISH 4.7mm/5.8mm - RRP £105.00..........................SAVING £16.00

Available as a 3rd, 4th and 5th section, owners of all 'long section' configured Daiwa poles can employ their choice of Super Section to suit their requirements.

An added benefit off of this design marvel is the amazing transformation of the poles performance.

Balance, action and responsiveness are all enhanced; a major asset for fishing at the longer lengths especially when a Super EXT is employed.

The Super No 3 Section fits the AIR, DAP, TNPX, CNGP, TAP, SM2, SPP, SCP, EA, WHP, TTP, CRP, MWP, CNP510, MWP811, CPP and TDRP Poles.

RRP £45.00...............SAVING £7.00

The Super No 4 Section fits the

AIR, DAP, TNPX, CNGP, TAP, SM2, SPP, SCP, EA, WHP, TTP, CRP, MWP, CNP510, MWP811, CPP and TDRP Poles.

RRP £63.00...............SAVING £9.00

The new 0.8m parallel No4 has been designed to fit between the 4th and 5th sections without having to remove a section so anglers can reach that extra distance required without affecting the performance and balance of the pole as much as it would with a reversible extension.

Of course because of its unique parallel design you can add two together if you need to.

The Super Parallel No 4 fits the

 AIR Z, AIR, AIR XLS, AIRITY SLIM, AIRITY XLS, AIRITY, TAP, TNPX, CNGP, TTP, SCP, WAT, SM2, CPP, TDRP, SPP, WHP, CRP, MWP, TNP410 and TNP210 Poles

RRP £75.00...............SAVING £11.00

SPARE POWER TOP 2 KIT FOR THE TDZR 10m MARGIN POLE

SPARE HOLLOW & SPLICED TOP KITS TO FIT THE TDZR 8.0m SYSTEM WHIP

SPLICED TOP 3 KIT - £50.00

HOLLOW TOP 3 KIT £40.00

SPARE TOP KITS FOR THE DAIWA TDZR5  POLE

MATCH TOP 3 KIT - RRP £79.00.....................SAVING £7.00

POWER TOP 2 KIT - RRP £52.00....................SAVING £6.00

DAIWA CUPPING KIT (TCUP1)

The TCUP1 is a stiffer higher grade option than the CUPK1

The TCUP1 will fit the 

AIR, DAP, TAP, TTP, TNPX, CNGP, SPP, SCP, EA, WHP, WAT, WKP, SM2, TNP410, TNP210, CNP, MWP, TTP, CRP, CPP and TDRP Poles.

THE CUPPING KIT DOES NOT COME WITH CUPS INCLUDED AS IN THE PICTURE

MATCH/POWER TOP KITS FOR THE DAIWA WHISKER POLE

MATCH TOP 3 - RRP £115.00..........................SAVING £15.00

MATCH TOP 4 - RRP £275.00..........................SAVING £25.00

POWER TOP 2 KIT - RRP £120.00..................SAVING £18.00

SPARE MATCH/POWER TOP KITS FOR THE WHISKER XLS POLE

MATCH & POWER TOP 3 KITS FOR THE DAIWA YANK N BANK 10m MARGIN POLE

MATCH TOP 3 KIT - RRP £59.00

POWER TOP 3 KIT - RRP £62.00

MATCH & POWER TOP KITS FOR THE DAIWA YANK N BANK PRO 11m MARGIN POLE

MATCH TOP KIT - RRP £59.00

POWER TOP KIT - RRP £59.00

This adjustable cupping top is a Generic kit that will fit all UK made Daiwa poles plus some others.

The unique design means that it will extend from 2.2m to 2.75m with just a pull of the telescopic top section and it has no plastic parts to go wrong.

Supplied with 2 plastic cups and fitting.

RRP £105.00.................SAVING £16.00

The Super EXT can take the previous Daiwa Poles from 16.0m to an amazing 17.7 Long and is still fishable at this length, it is an amazing achievement.

And when combined with the Super 4th the performance takes another leap up.

This marvel of pole technology is both generic and parallel allowing two EXT's to be used in tandem.

Designed using Super High MSG and Double Ring Design the rigidity and wall strength achieved is one of the highest levels ever to be manufactured.

SUITABLE FOR THE FOLLOWING POLES - SPP, EA, SM2, WHP, TNP 210, TNP 410, CNP 510, MWP 811, CRP 161  & TDRP 161

RRP £250.00...............SAVING £91.00

THIS HAS BEEN REDUCED TO CLEAR

ONLY 1 LEFT IN STOCK